The object of this project was to show the existence of high-frequency fluctuations. The measurement of these fluctuations and the subsequent frequency analyses revealed that these frequencies may be
In this project a number of industrial and agricultural waste products have been characterised and evaluated in terms of alkali-getter performance. The intended use is for biomass-fired power stations
The object was to improve existing PARK models for calculating array losses for wind farms with focus on large offshore wind farms. The project shows that intelligent use of the model parameters
The compiled measuring results and modelling tests produced a scientifically founded basis for providing recommendations for future offshore wind farms in respect of mutual distances between farms and
Københavns Universitet
ForskEL
2004
2011
Recycling of nutrients in wood ash is currently made difficult by the Danish bio ash notice (2004). The aims of this project is to develop and compile a well-documented concept for recirculation of
The project establishes a new model of the Danish electricity system in the form of two buses (east and west Denmark), to which new models of load and production units are connected in the form of
The project aimed at developing additives that will minimise corrosion during biomass combustion. To determine the impact of additives on SCR catalysts, the project tested potential additives in the
The development of evacuated glazings approaches prototype production. Thus the basis for decision-making for commercial production will be created within approx. a year and a half.
The project aim is to develop an integrated SOFC module (standard module) which can be based on the most cost effective materials and manufacturing processes in order to reduce SOFC plant expenses.
This project was a pilot study which had as its main goal the evaluation of the use of a simulation method, based on strategic feedback models, to help understanding the evolution of a competitive
The Danish Energy Agency has renewed the Danish participation in the Implementation Agreement on Energy Technology Data Exchange (ETDE) for another 5-year period from January 26th, 1993.
Coordination of all Danish CADDET activities. Mailing of CADDET Newsletters, brochures and similar material. Organization of CADDET register inputs and liasion activities to the CADDET Centre and
The result of any risk analysis is uncertain, sometimes very uncertain. Despite of this fact, there is still a limited tradition for describing uncertainties, mainly due to the lack of appropriate
The activities in 1996 has to a large degree followed the budget proposal of 27 June 1995. During the year two IEA Executive Committee meeting were held, first in Finland and then in Germany. The
A combined systems development and demonstration programme has been initiated in order to be able to identify the necessary and adequate preconditions of a profitable production of fuel willow (salix)
KORA, Det Nationale Institut for Kommuners og Regioners Analyse og Forskning
EFP
1997
2000
The primary goal of the project is to investigate possibilities and barriers for implementing energy conservation in the East and Central European industries. The focus is on technical, economic as
The aim of the project was to demonstrate ventilated solar walls in practice, including satisfactory architectural and structural adjustment to a certain building.